6
Heart rate monitor should be worn directly on skin just around the chest.
Cadence sensor should be installed on the crank arm of no-drive side, then rotate
the crank arm.
Speed sensor should be installed on the top of front wheel hub, then rotate the front
wheel.
2) Hold more than 2 seconds to enter the setting mode.
3)
Select to scroll setting mode from E1 to E4.
4)
Select to enter E1 mode when E1 is flashing.
5)
iGS50E is searching ANT+ sensors automatically.
6)
When sensors are connected, the icons will light up.
7)
iGS50E will exit searching sensors mode in 20
seconds.
Note：
