Website: www.keennew.com
Qixiang Technology, Contact Us for purchasing
Email: sales@keennew.com
Whatsapp: +86 13249165907
3
Hardware Installation
1. Insert or Remove SIM Card
Insert or remove the SIM card as shown in the following steps.
Insert SIM card
1) Make sure router is powered off.
2) To open the SIM card slot, use a card removal pin plug in the card hole.
3) To insert SIM card, press the card with finger until your hear a click and
then push back the sim card slot
Remove SIM card
1) Make sure router is powered off.
2) To open the SIM card slot, use a card removal pin plug in the card hole.
3) To remove SIM card, press the card with finger until it pops out and then
take out the card.
4) To push back the sim card slot.
Note:
1) Use the specific card when the device is working in extreme temperature
(temperature exceeding 40 °C), because the regular card for long-time
working in harsh environment will be disconnected frequently.
2) Do not forget to push back the card to avoid being lost.
3) Do not touch the metal of the card surface in case information in the
card will lose or be destroyed.
4) Do not bend or scratch the card.
5) Keep the card away from electricity and magnetism.
6) Make sure router is powered off before inserting or removing the card.
2. Attach External Antenna (SMA Type)
Attach external SMA antenna to the router’s antenna connector and twist
tightly. Make sure the antenna is within the correct frequency range
provided by the ISP and with 50 Ohm impedance.
3. Mount the Router
