AP3X Robot User Manual
38 Document Version V1.1.0 (01/11/2023)
When the robot is not used for a long time, it should be
disassembled and fixed in the packing case in factory mode.
5.1.2
Unpacking inspection
When the robot is transported to the user site, check:
whether the packing case is placed upward vertically and dry;
whether the packing case is intact.
After inspection, take the components out of the case according to the following
steps:
Step 1
Remove the fixing bolts (M6) from the upper cover of the packing case.
Step 2
Remove the upper cover of the packing case. The components in the
case are shown in Figure 5-2.
