AP3X Robot User Manual
92 Document Version V1.1.0 (01/11/2023)
Figure 7-20 Input instructions
7.4.7
Run instructions
After editing the instructions, click on the <Run> button in the menu bar
to run all the instructions in the "instruction editing area" one by one in
sequence. The results are displayed in the "instruction output area", as shown
in Figure 7-21.
If you select the < All > key on the upper right of the output area, the Macro
instruction currently sent and received will be displayed in the "Instruction
Output area"; if you select the < Information > key, the Hidden message
received will be displayed in the "Instruction Output area".
