AP3X Robot User Manual
104 Document Version V1.1.0 (01/11/2023)
parameter name is the default name, and you can click Rename to
modify it, as shown in Figure 7-35.
Figure 7-35 New Profile
Step 4
New Location Array; Click "New Array" in "Location Array", and the
"New Array" interface will pop up. Enter the array name and array
length, and click "OK", as shown in Figure 7-36.
Figure 7-36 New Location Array
After completion, the "Location Array" information will appear, and the point will
be recorded as the robot's current Cartesian coordinates, as shown in Figure 7-37.