Chapter 1 Safety Precautions
Document Version V1.1.0(01/11/2023) 3
Users should carry out regular inspection and maintenance of the equipment
according to the manual and related requirements and timely replace faulty
parts to ensure safe operation and service life of the equipment.
If the robot is scrapped and shall be discarded, please handle industrial
waste properly in accordance with relevant laws and regulations to protect
the environment.
1.2
Precautions for safe use
Shut off the power when installing and maintaining the
robot to prevent accidents. Do not enter the work area
of the robot after it is powered on to prevent danger.
To avoid personal injury and property damage caused
by the falling of the end of the robot in case of sudden
power failure when it is in servo-on state, AP3X Robot is
designed with a new function of power-off delay
protection to ensure that the end of the robot will not
fall sharply when it encounters a power failure in the
servo-on state. However, this function shall not be used
as a conventional shutdown method, otherwise it may
affect the service life of the robot.
Please observe the following safety rules when conducting installation, teaching
