2
3
①
②
Bracket(STS)
Housing(Al)
Lens(PC)
Parts Definition/ Bracket Adjustment
■
Parts Definition
■
Bracket Adjustment
• In case angle adjustment is needed after installation, please slightly loosen the bolt (1) and adjust the angle as desired, and
fasten the bol later
QWL20 / QWL20-DT
• First, machine holes on the mounting surface(2).
• The mounting holes of this product are 9mm in diameter.
• Please insert the bolt through the hole of bracket, and tighten the nut from the opposite of the mounting surface.
Ø9 HOLE
• Machine holes on the mounting surface referring to the diagram below.
Installation/ Mounting Hole Specifications
■
Installation
■
Mounting Hole Specifications
