Installation/ Mounting Hole Specifications
■
Installation
•
First, machine taps or holes on the mounting surface.
•
The mounting hole of this product is 6.5mm indiameter(hole).
•
When machining taps, fasten the bolt through the mounting hole of theproduct.
•
When machining holes, insert the bolt through the hole of the product, and tighten the nut from the opposite side of the mounting surface.
(When assembling using bolt and nut, please make sure to use flat washer and springwasher.)
■
Mounting Hole Specifications
•
Machine holes on the mounting surface referring to the diagram below.
.
Installation Environment and Protection Rating
•
This product is designed to be explosionproof.
•
Please make sure to use the product in an environment that meets the specified explosion proof rating and regulations.
•
For furtherinformation, pleasevisitour website (http://www.qlight.com).
4
