110
4. Remove the oil filler bolt and the drain bolt to drain
the oil.
Final gear oil drain bolt
5. Install the drain bolt, and then tighten it to the
specified torque.
Tightening torque:
Final gear oil drain bolt:
23 Nm (2.3 m
·
kgf, 16 ft
·
lbf)
6. Add the recommended final gear oil to the brim of
the filler hole.
Recommended oil:
SAE 80 API GL-4 Hypoid gear oil
Oil quantity:
0.23 L (0.20 Imp qt, 0.24 US qt)
Be sure no foreign material enters the final gear case.
7. Install the oil filler bolt, and then tighten it to the
specified torque.
8. Check for oil leakage. If oil leakage is found, check for
the cause.
9. Install the final gear case cover bolts, and then tighten
them to the specified torque.
Tightening torque:
Final gear case cover bolt:
16 Nm (1.6 m
·
kgf, 11 ft
·
lbf)
USER'S MANUAL
