USER'S MANUAL
21
If the motorcycle must be supported with the side stand on a gentle slope, the botto m ge ar should be engaged
in order to prevent unexpected sliding from the stand. Return to the neutral gear prior to starting the engine.
Turn the ignition switch to OFF to stop the engine.
Remove the key from the switch.
Lock the steering lock for safety.
Check and Maintenance
The following table gives the schedule of check and maintenance according to the intervals based on odometer
reading or the number of used months. At the end of each interval, the required check, inspection, lubrication
and other service should be carried out. If your motorcycle has been used under bad conditi ons, for example ,
continuously running with large throttle in a windy or dusty environment, necessary maintenance should be
done each time after operation in order to guarantee its reliability. Our authorized dealers can provide further
maintenance instructions. The steering assembly, shock absorbing system and the wheel system require the
special and careful maintenance, for they are the key components of the motorcycle. For the sake of safety, it
is advised that these components be serviced by qualified workers.
WARNING
The maintenance after the running-in period must be carried out as soon as the odometer reading reaches to
1,000 km. Timely maintenance contributes to the safety and reliabilit y. Carry out the regular maintenance
thoroughly according to the instructions of this manual.
