10–iSCSI Protocol
iSCSI Boot
189
83840-546-00 D
4.
In the MBA Configuration menu (
), use the up or down arrow
keys to select each of following parameters.
VLAN Mode
: Press ENTER to change the value to
Enabled
VLAN ID
: Press ENTER to open the VLAN ID dialog, type the target
VLAN ID (1–4096), and then press ENTER.
Figure 10-11. Configuring iSCSI Boot VLAN
5.
Press ESC once to return to the Main menu, and a second time to exit and
save the configuration.
6.
Select
Exit and Save Configurations
to save the VLAN for iSCSI boot
configuration (
). Otherwise, select
Exit and Discard
Configuration
. Press ENTER.
Figure 10-12. Saving the iSCSI Boot VLAN Configuration
7.
After all changes have been made, press CTRL+ALT+DEL to exit CCM and
to apply the changes to the adapter's running configuration.
Other iSCSI Boot Considerations
There are several other factors that should be considered when configuring a
system for iSCSI boot.
Changing the Speed and Duplex Settings in
Windows Environments
Changing the Speed & Duplex settings on the boot port using Windows Device
Manager when performing iSCSI boot through the offload path is not supported.
Booting through the NDIS path is supported. The Speed & Duplex settings can be
changed using the QCS management utility for iSCSI boot through the offload and
NDIS paths.
Summary of Contents for 8400 Series
Page 390: ......
