10–iSCSI Protocol
iSCSI Offload in Windows Server
204
83840-546-00 D
3
Error
Maximum command sequence number is not serially greater
than expected command sequence number in login
response. Dump data contains Expected Command
Sequence number followed by Maximum Command
Sequence number.
4
Error
MaxBurstLength is not serially greater than FirstBurstLe-
ngth. Dump data contains FirstBurstLength followed by Max-
BurstLength.
5
Error
Failed to setup initiator portal. Error status is given in the
dump data.
6
Error
The initiator could not allocate resources for an iSCSI con-
nection
7
Error
The initiator could not send an iSCSI PDU. Error status is
given in the dump data.
8
Error
Target or discovery service did not respond in time for an
iSCSI request sent by the initiator. iSCSI Function code is
given in the dump data. For details about iSCSI Function
code please refer to iSCSI User's Guide.
9
Error
Target did not respond in time for a SCSI request. The CDB
is given in the dump data.
10
Error
Login request failed. The login response packet is given in
the dump data.
11
Error
Target returned an invalid login response packet. The login
response packet is given in the dump data.
12
Error
Target provided invalid data for login redirect. Dump data
contains the data returned by the target.
13
Error
Target offered an unknown AuthMethod. Dump data con-
tains the data returned by the target.
14
Error
Target offered an unknown digest algorithm for CHAP. Dump
data contains the data returned by the target.
15
Error
CHAP challenge given by the target contains invalid charac-
ters. Dump data contains the challenge given.
16
Error
An invalid key was received during CHAP negotiation. The
key=value pair is given in the dump data.
Table 10-5. Offload iSCSI (OIS) Driver Event Log Messages
Message
Number
Severity
Message
Summary of Contents for 8400 Series
Page 390: ......
