17–QLogic Teaming Services
Event Log Messages
328
83840-546-00 D
10
Warning
Network adapter is
disconnected.
The physical adapter
is not connected to the
network (it has not
established link).
Check that the net-
work cable is con-
nected, verify that the
network cable is the
right type, and verify
that the link partner
(switch or hub) is
working correctly.
11
Informational
Network adapter is
connected.
The physical adapter
is connected to the
network (it has estab-
lished link).
No action is required.
12
Error
ASP Features Driver is
not designed to run on
this version of Operat-
ing System.
The driver does not
support the operating
system on which it is
installed.
Consult the driver
release notes and
install the driver on a
supported operating
system or update the
driver.
13
Informational
Hot-standby adapter is
selected as the pri-
mary adapter for a
team without a load
balancing adapter.
A standby adapter has
been activated.
Replace the failed
physical adapter.
14
Informational
Network adapter does
not support Advanced
Failover.
The physical adapter
does not support the
QLogic NIC Extension
(NICE).
Replace the adapter
with one that does
support NICE.
15
Informational
Network adapter is
enabled through man-
agement interface.
The driver has suc-
cessfully enabled a
physical adapter
through the manage-
ment interface.
No action is required.
16
Warning
Network adapter is
disabled through man-
agement interface.
The driver has suc-
cessfully disabled a
physical adapter
through the manage-
ment interface.
No action is required.
Table 17-9. Intermediate Driver Event Log Messages (Continued)
System
Event
Message
Number
Severity
Message
Cause
Corrective Action
Summary of Contents for 8400 Series
Page 390: ......
