12
Figure 9. Discovered iSCSI Initiators Information
To assign a LUN to a server, run the Target Presentation/LUN Mapping Wizard. This wizard
allows you to map a LUN to the iSCSI initiator on your server.
b.
On the
Wizards
menu, click
Presentation Wizard
.
c.
On the Target Selection window, click the box next to the LUNs you want to map, and then click
Next
.
d.
On the Select the Initiators for the LUN Presentation window (
), select the initiators
for the LUN presentation, and then click
Next
.
Figure 10. Target Presentation/LUN Mapping Wizard
e.
To save your mappings, click
Save
, and then enter your management password.
