6–iSCSI Noninteractive Commands
-isns (Configure iSNS Settings)
6-14
SN0054667-00 C
-isns
(Configure iSNS Settings)
To configure the iSNS settings for QLA4010 and QLA405
x
, issue the
-isns
command as follows:
-isns <
hba_port_inst
>
[
iSNS IP Address
] [iSNSPORT <
port_number
>]
If you do not specify the
[
iSNS IP Address
]
parameter, the command disables
the iSNS client on the specified adapter port.
Issuing this command resets the adapter.
-isns6
(iSNS Settings)
To configure the iSNS settings for IPv6 (QLE406
x
and newer), issue the
-isns6
command as follows:
-isns <
hba_port_inst
> [iSNS
IPv6-or-IPv4 Address
] [-iSNSPORT
<
port_number
>]
If you do not specify the
[iSNS
IPv6-or-IPv4 Address
]
parameter, this
command disables the iSNS client on the specified adapter port.
Issuing this command resets the adapter.
-l
(List LUN Information)
Use the
-l
command to view the following information about LUNs attached to
the selected target:
Adapter/Target/LUN number
Vendor name
Product ID
Product revision
LUN size
You can view this information for a specific LUN or for all LUNs attached to the
selected target.
To list the LUN information, issue the
-l
command as follows:
-l <
hba_port_inst>
<
Target ID
[
LUN ID
]>
If you do not include the
LUN ID
parameter, all the LUNs on the specified target
are shown.
Summary of Contents for QConvergeConsole CLI 2400 Series
