Switch Command Line Interface
Groups and Commands
D000103-000 E
1-127
Options:
Sample Output:
NOTE:
The output is in the form: 'mib : mib_object : table_index : value' . For
more details on the snmpTargetAddrTable see SNMP-TARGET-MIB,
RFC 2573.
show
Displays the contents of the
snmpTargetAddrTable
.
add
Adds a row to the
snmpTargetAddrTable
.
edit
Modifies an existing row in the
snmpTargetAddrTable
.
delete
Removes an existing row of the
snmpTargetAddrTable
.
-n
Name. A unique name used to identify a row. Any name with a space (e.g. xxx v3) must be
surrounded by double quotes (").
-a
Address. The target machine IP address in dotted decimal form.
-p
Port. The target port to send traps and information.
-t
Timeout. The time to wait for an information response.
-r
Retry count. The number of re-send attempts for information.
-l
Tag list. Indicates the traps and information that is sent.
-v
Parameters. This maps to an entry in the
snmpTargetAddrTable.
-s
Storage type. Determines whether the entry is saved in flash memory.
-i
Status, 1=Active, 2=Not In Service, 3=Not Ready.
-> snmpTargetAddr
rfc2573t:snmpTargetAddrTDomain: nms v1 : 1.3.6.1.6.1.1
rfc2573t:snmpTargetAddrTDomain: nms v2 : 1.3.6.1.6.1.1
rfc2573t:snmpTargetAddrTDomain: nms v3 : 1.3.6.1.6.1.1
rfc2573t:snmpTargetAddrTAddress: nms v1 : (ip addr)00.00.00.00 (port)0000
rfc2573t:snmpTargetAddrTAddress: nms v2 : (ip addr)00.00.00.00 (port)0000
rfc2573t:snmpTargetAddrTAddress: nms v3 : (ip addr)00.00.00.00 (port)0000
