1–Operations and Administration
Configuration and Monitoring Features
1-24
D000101-000 E
Figure 1-34 LDAP Authentication Window
3.
In the
LDAP Server IP Address
box, enter the address of the applicable
LDAP server.
4.
In the
LDAP Server Port
box, enter the applicable server port number (the
default is 389).
5.
Click
Apply
.
HTTP/CLI Session Configuration
The hyper text transfer protocol (HTTP) and command line interface (CLI) session
configuration feature allows the user to set HTTP and CLI session time out
parameters, as well as set security requirements for the switch.
The session time out duration is the length of time that a session remains active if
there is no GUI activity. If a session is inactive for a time exceeding the time out
duration, the user will be logged out.
To modify the HTTP and CLI configurations:
1.
From the menu, select
Maintenance
.
The
HTTP/CLI Session Config
button is displayed (
Figure 1-35
).
Figure 1-35 HTTP/CLI Session Config Button
2.
Click
HTTP/CLI Session Config
.
The
HTTP/CLI Session Configuration
window is displayed (
Figure 1-36
).
