1–Operations and Administration
Configuration and Monitoring Features
D000101-000 E
1-25
Figure 1-36 HTTP/CLI Session Configuration Window
3.
To modify the session time out duration (in seconds), click on the existing
configuration. The row changes to orange.
4.
In the
HTTP Timeout Duration
field, enter the new timeout duration (in
seconds). The default is 0 seconds (i.e., no timeout).
5.
In the
CLI Timeout Duration
field, enter the new timeout duration (in
seconds). The default is 600 seconds.
6.
To change the
User Authentication
parameter, click on the
User
Authentication
list (
Figure 1-37
).
Figure 1-37 User Authentication Dropdown List
7.
Select the preferred user authentication method. These are:
Login Enabled
- UserName and Password must be entered, and must
match what is in the database of the local switch.
User Only Required
- According to the local switch database, a valid
username must be entered. A password is not required.
Login Disabled
- Does not require username or password.
LDAP
- use an LDAP server. If the user name/password validation fails
to complete successfully, check in the database of the local switch.
8.
To change the
HTTP Mode
parameter, click on the
HTTP Mode
list
(
Figure 1-38
).
