1–Operations and Administration
Configuration and Monitoring Features
1-46
D000101-000 E
Link Width Enabled
:
Link Width Enabled is the allowed link width(s) that a port can arbitrate to.
Normally, this defaults to the Link Width Supported value, but can be overridden
by the subnet manager.
Link Width Supported
:
Indicates the link width in terms of multipliers of 2.5 Gbit/sec full duplex serial links
supported by the port.
Active Link Speed
:
Indicates the speed of the full duplex serial link. This is either 2.5Gbps (single data
rate, or SDR), or 5.0Gbps (double data rate, or DDR), or 10.0Gbps (quad data
rate, or QDR).
Link Speed Enabled
:
Link Speed Enabled is the allowed link speed(s) that a port can arbitrate to.
Normally this defaults to the Link Speed Supported value, but can be overridden
by the subnet manager.
Link Speed Supported
:
The supported link speed of the port. This could be 2.5Gbps (SDR), 5.0Gbps
(DDR), 10Gbps (QDR) or a combination.
InfiniBand Statistics Field Descriptions
Transmit 32 Bit Words
:
The number of 32-bit data words transmitted by the port, not including flow control
and VCRC data.
Receive 32 Bit Words
:
The number of 32-bit data words received by the port, not including flow control
and VCRC data.
Transmit Packets
:
The number of data packets transmitted by the port, not including flow control
packets.
Receive Packets
:
The number of data packets received by the port, not including flow control
packets.
Symbol Errors
:
