background image

A – Command Line Interface

User Command

59226-00 B

A-95

A

User Command

Administers and displays user accounts.

Authority

Admin account name and an Admin session. The Accounts and List keywords are 
available to all account names without an Admin session.

Syntax

user

accounts
add
delete [account_name]
edit
list

Keywords

accounts

Displays all user accounts that exist on the switch. This keyword is available to all 
account names without an Admin session.

add

Add a user account to the switch. You will be prompted for an account name, a 
password, authority, and an expiration date.

„

A switch can have a maximum of 15 user accounts.

„

Account names are limited to 15 characters; passwords must be 4–20 
characters.

„

Admin authority grants permission to use the Admin command to open an 
admin session, from which all commands can be entered. Without Admin 
authority, you are limited to view-only commands.

„

The expiration date is expressed in the number of days until the account 
expires (2000 maximum). The switch will issue an expiration alarm every 
day for seven days prior to expiration. 0 (zero) specifies that the account has 
no expiration date.

delete [account_name]

Deletes the account name given by [account_name] from the switch.

edit

Initiates an edit session that prompts you for the account name for which to 
change the expiration date and authority.

list

Displays the list of users currently logged in and their session numbers. Provides 
the same function as the Show Users command. This keyword is available to all 
account names without an Admin session.

Summary of Contents for SANbox 1400 Series























































































































































































































































































Reviews: