P
reli
mi
na
ry
Topology Window
SANbox-8/16 Switch Management
2-30
SANsurfer Switch Management
59010-06 Rev. A
User’s Manual
1.
From the Shelf Administration window (see
Figure 2-30
on
page 2-79
), on
the line that is to have the icon changed, click on the World-Wide-Name field
until the desired icon is displayed.
2.
Repeat step 1 for any other devices displayed in the table.
Add a Shelf to an Existing Rack
When a shelf is added to a rack, it can be added either above or below the switch. A
shelf cannot be placed between existing shelves, but will be added above the top
shelf, or below the bottom shelf.
1.
Click on the rack/shelf to be moved and drag it over the lower edge (or upper
edge, depending on desired location) and when the rack turns blue, release
the mouse button.
2.
The shelf is now added to the rack and the rack on which the shelf resided has
been removed.
Remove a Shelf from a Rack:
A shelf can only be removed by returning all devices to the switches from which
they originated.
1.
Click on the shelf to be removed. The shelf turns blue.
2.
Click on the Delete button on the tool bar. The shelf is removed.
Moving a Device from One Location to Another Within the Application
Moving a device in the application and physically moving a device in the fabric are
independent of each other. A device may be moved in the application without an
impact on the operation of the device and physically moving a device within the
fabric will not require the user to modify the Topology window.
Devices can be moved from a switch to an existing shelf or to a new shelf by
dragging the device icon to the desired location on the fabric display. When the left
mouse button is released, the icon is placed in the shelf the cursor is over when the
button is released, or if the cursor is not over a shelf, a new rack/shelf is created at
the cursor location.
When a shelf containing one or more devices is selected, the shelf turns blue, black
lines appear from each device in the icon to the port with which they are physically
attached (see
Figure 2-8
), and the left column of the window shows all devices
present on this shelf. When multiple devices are grouped on a shelf, a partition is
created on the shelf icon to represent each device. The partitions are ordered from
left to right to correspond with the top-to-bottom order of the left column of the
window.
To move a device from a switch:
1.
Click on the switch that contains the device to be moved.
Summary of Contents for SANbox-16
