5 – Switch Configuration
Displaying Switch Information
59183-02 A
5-7
A
5.1.5
Hardware Information
Enter the
Show Chassis
command to display the status of the switch hardware
including fans, power supplies, internal temperature, and Heartbeat LED status.
The following is an example of the Show Chassis command for model 5602:
SANbox #> show chassis
Chassis Information
-------------------
BoardTemp (1) - Degrees Celsius 36
FanStatus (1) Good
FanStatus (2) Good
FanDirection (1) BackToFront
FanDirection (2) BackToFront
PowerSupplyStatus (1) Good
PowerSupplyStatus (2) Good
HeartBeatCode 1
HeartBeatStatus Normal
The HeartBeatCode and HeartBeatStatus entries indicate the Power-on Self Test
(POST) results revealed by the Heartbeat LED blink patterns. The result is normal
operation or a blink pattern indicating a critical error as described in
Table 5-1
.
Refer to your
Installation Guide
for more information about the Heartbeat LED and
its blink patterns.
Table 5-1. Heartbeat LED Activity
HeartBeatCode–HeartBeatStatus
Description
1–Normal
One blink per second–Normal operation
2–AppDied
Two blink cluster–Internal firmware failure
3–PostFailed
Three blink cluster–Fatal POST error
4–CorruptFilesystem
Four blink cluster–Configuration file system error
5–Overheating
Five blink cluster– Over temperature
Summary of Contents for SANbox 5000 Series
