4 – Managing Switches
Configuring a Switch
4-20
59056-03 C
A
4.7.2.2
Switch Administrative States
The switch administrative state determines the operational state of the switch. The
switch administrative state exists in two forms: the configured administrative state
and the current administrative state.
The configured administrative state is the state that is saved in the switch
configuration and is preserved across switch resets. SANsurfer Switch
Manager always makes changes to the configured administrative state. The
configured administrative state is displayed in the Switch Properties dialog.
The current administrative state is the state that is applied to the switch for
temporary purposes and is not retained across switch resets. The current
administrative state is set using the Set Switch command. Refer to the
”Set
Command” on page A-59
.
Table 4-4
describes the administrative state values.
Table 4-4. Switch Administrative States
Parameter
Description
Online
The switch is available.
Offline
The switch is unavailable.
Diagnostics
The switch is in diagnostics mode, is unavailable, and tests can
then be run on all ports of the switch.
Summary of Contents for SANbox 5200 Series
Page 48: ...2 Using SANsurfer Switch Manager Using the Faceplate Display 2 30 59056 03 C A Notes...
Page 152: ...4 Managing Switches Displaying Hardware Status 4 46 59056 03 C A Notes...
Page 180: ...5 Managing Ports Graphing Port Performance 5 28 59056 03 C A...
Page 318: ...A Command Line Interface Zoning Command A 138 59056 03 C A Notes...