4 – Managing Switches
Configuring a Switch
59056-03 C
4-33
A
4.7.7.1
SNMP Configuration
The SNMP configuration defines how authentication traps are managed.
Table 4-7
describes the SNMP configuration parameters. The illegal characters for the
user-defined fields are the pound sign (#), semi-colon (;), and comma (,).
Table 4-7. SNMP Configuration Parameters
Parameter
Description
SNMP Enabled
Enables or disables SNMP communication with other switches in the
fabric.
Contact
Specifies the name (up to 64 characters) of the person who is to be
contacted to respond to trap events. The default is “undefined”.
Read
Community
Read community password (up to 32 characters) that authorizes an
SNMP agent to read information from the switch. This is a write-only
field. The value on the switch and the SNMP management server
must be the same. The default is “public”.
Trap Community
Trap community password (up to 32 characters) that authorizes an
SNMP agent to receive traps. This is a write-only field. The value on
the switch and the SNMP management server must be the same.
The default is “public”.
SNMP Proxy
If enabled, you can use SNMP to monitor and configure any switch in
the fabric.
Location
Specifies the name (up to 64 characters) for the switch location. The
default is “undefined”.
Authentication
Trap
Enables or disables the reporting of SNMP authentication failures. If
enabled, a notification trap is sent when incorrect community string
values are used. The default value is "False".
Write
Community
Write community password (up to 32 characters) that authorizes an
SNMP agent to write information to the switch. This is a write-only
field. The value on the switch and the SNMP management server
must be the same. The default is “private”.
Summary of Contents for SANbox 5200 Series
Page 48: ...2 Using SANsurfer Switch Manager Using the Faceplate Display 2 30 59056 03 C A Notes...
Page 152: ...4 Managing Switches Displaying Hardware Status 4 46 59056 03 C A Notes...
Page 180: ...5 Managing Ports Graphing Port Performance 5 28 59056 03 C A...
Page 318: ...A Command Line Interface Zoning Command A 138 59056 03 C A Notes...