![background image](http://html2.mh-extra.com/html/qlogic/sanbox-5200-series/sanbox-5200-series_user-manual_3279626146.webp)
4 – Managing Switches
Restoring the Factory Default Configuration
4-40
59056-03 C
A
4.11
Restoring the Factory Default Configuration
You can restore the switch and port configuration settings to the factory default
values. To restore the factory configuration on a switch, open the Switch menu
and select
Restore Factory Defaults
.
Table 4-9
lists the factory default switch
configuration settings.
Restoring the switch to the factory default configuration does not restore the
account name and password settings. The most current port license will remain in
effect. To restore user accounts, you must select the
Reset Password File
option
in the maintenance menu. Refer to “Recovering a Switch” in the Installation Guide
for your switch for information about maintenance mode and the maintenance
menu.
Table 4-9. Factory Default Configuration Settings
Setting
Value
Symbolic Name
SANbox
Administrative State
Online
Domain ID
1
Domain ID Lock
False
In-band Management
True
Broadcast Support
Enable
Resource Allocation Timeout (R_A_TOV)
10000 milliseconds
Interop Mode
True
I/O Stream Guard
Disabled
Device Scan Enabled
True
Error Detect Timeout (E_D_TOV)
2000 milliseconds
SNMP Enabled
True
SNMP Proxy
True
IP Address
10.0.0.1
FDMI Enabled
True
FDMI HBA Entry Level
1000
Subnet Mask Address
255.0.0.0
Gateway Address
10.0.0.254
Summary of Contents for SANbox 5200 Series
Page 48: ...2 Using SANsurfer Switch Manager Using the Faceplate Display 2 30 59056 03 C A Notes...
Page 152: ...4 Managing Switches Displaying Hardware Status 4 46 59056 03 C A Notes...
Page 180: ...5 Managing Ports Graphing Port Performance 5 28 59056 03 C A...
Page 318: ...A Command Line Interface Zoning Command A 138 59056 03 C A Notes...