![background image](http://html2.mh-extra.com/html/qlogic/sanbox-5200-series/sanbox-5200-series_user-manual_3279626015.webp)
59056-03 C
1-1
Section 1
Introduction
This manual describes the switch management tools which include the SANsurfer
Switch Manager application (version 5.00) and the Command Line Interface (CLI)
for the SANbox 5200 Series Fibre Channel switches (firmware version 5.0). The
SANbox 5200 Series switches are 20 port non-blocking Fibre Channel switches.
This manual defines the features, components, and performance characteristics
of the SANbox 5200 Series switches. The SANsurfer Switch Manager application
is the primary focus of this manual which is organized as follows:
Section 1
describes the intended audience for this manual, related
materials, and technical support.
Section 2
describes how to use SANsurfer Switch Manager, its menus, and
its displays.
Section 3
describes fabric management tasks.
Section 4
describes switch management tasks.
Section 5
describes port and device management tasks.
Appendix A
describes the command line interface.
A glossary of terms and an index are also provided.
1.1
Intended Audience
This manual introduces the switch management products and explains their
installation and use. It is intended for users responsible for installing and using
switch management tools.
1.2
Related Materials
Refer to the following manuals for information about switch hardware and
installation.
SANbox 5200 Series Fibre Channel Switch Installation Guide
, publication
number 59055-03.
Summary of Contents for SANbox 5200 Series
Page 48: ...2 Using SANsurfer Switch Manager Using the Faceplate Display 2 30 59056 03 C A Notes...
Page 152: ...4 Managing Switches Displaying Hardware Status 4 46 59056 03 C A Notes...
Page 180: ...5 Managing Ports Graphing Port Performance 5 28 59056 03 C A...
Page 318: ...A Command Line Interface Zoning Command A 138 59056 03 C A Notes...