5 – Managing Ports
Configuring Ports
5-12
59056-03 C
A
5.2.2
Changing Port Speeds
The 1-Gbps/2-Gbps ports are capable of transmitting and receiving at 1-Gbps or
2-Gbps. The ports can be configured for either transmission speed or to sense the
transmission speed of the device to which it is connected.
Table 5-8
describes the
port speeds. To change the port speed, do the following:
1.
Select one or more 1Gbps/2Gbps ports in the faceplate display.
2.
Open the Port menu and select
Port Properties
.
3.
Click the radio button that corresponds to the port speed you want.
4.
Click the
OK
button to write the new port speed to the switch.
Table 5-8. Port Speeds
State
Description
Auto-Detect
Matches the transmission speed of the connected device. This is the
default.
1Gbps
Sets the transmission speed to 1-Gbps.
2Gbps
Sets the transmission speed to 2-Gbps.
10Gbps
Sets the transmission speed to 10-Gbps.
Summary of Contents for SANbox 5200 Series
Page 48: ...2 Using SANsurfer Switch Manager Using the Faceplate Display 2 30 59056 03 C A Notes...
Page 152: ...4 Managing Switches Displaying Hardware Status 4 46 59056 03 C A Notes...
Page 180: ...5 Managing Ports Graphing Port Performance 5 28 59056 03 C A...
Page 318: ...A Command Line Interface Zoning Command A 138 59056 03 C A Notes...