![background image](http://html2.mh-extra.com/html/qlogic/sanbox-5200-series/sanbox-5200-series_user-manual_3279626194.webp)
A – Command Line Interface
CIMSubscription Command
A-14
59056-03 C
A
CIMSubscription Command
Creates, edits, or removes CIM subscriptions.
Authority
Admin session and a CIM Edit session. Refer to the
”CIM Command” on
page A-11
for information about opening a CIM edit session.
Syntax
cimsubscription
create [subscription_name]
delete [subscription_name]
edit [subscription_name]
Keywords
create [subscription_name]
Prompts you in a line-by-line fashion to create a CIM subscription with the name
given by [subscription_name]. [subscription_name] can have up to 32 characters:
0-9, A-Z, a-z, _, $, ^, and -.
Table A-4
describes the CIM subscription configuration
parameters.
delete [subscription_name]
Deletes the subscription given by [subscription_name] from the CIM database.
edit [subscription_name]
Opens an editing session in which you can modify the CIM subscription given by
[subscription_name]. Refer to
Table A-4
for a description of the CIM subscription
configuration parameters.
Table A-4. CIM Subscription Configuration Parameters
Parameter
Description
Name
Subscription name.
FilterID
Event type for which the switch monitors and sends an indication
to the CIM client. The event types are as follows:
CreateComputerSystem – A switch is added to the fabric.
This is the default.
ModifyComputerSystem – A switch state change.
DeleteComputerSystem – A switch is removed from the
fabric.
CreateFCPort – Not supported.
ModifyFCPort – A Fibre Channel port state change.
DeleteFCPort – Not supported.
EnabledState
Enable (True) or disable (False) the subscription. The default is
True.
Duration
Subscription life span in seconds. The subscription life span
begins when the subscription is created. Expired subscriptions
do not send indications to the CIM client though they remain in
the CIM database. Values can be 1–720000. 0 indicates
indefinite, which is the default.
Summary of Contents for SANbox 5200 Series
Page 48: ...2 Using SANsurfer Switch Manager Using the Faceplate Display 2 30 59056 03 C A Notes...
Page 152: ...4 Managing Switches Displaying Hardware Status 4 46 59056 03 C A Notes...
Page 180: ...5 Managing Ports Graphing Port Performance 5 28 59056 03 C A...
Page 318: ...A Command Line Interface Zoning Command A 138 59056 03 C A Notes...