![background image](http://html2.mh-extra.com/html/qlogic/sanbox-5200-series/sanbox-5200-series_user-manual_3279626218.webp)
A – Command Line Interface
Image Command
A-38
59056-03 C
A
Notes
To provide consistent performance throughout the fabric, ensure that all switches
are running the same version of firmware.
To install firmware when the management workstation has an FTP server, use the
Image Install command or the
”Firmware Install Command” on page A-24
. To
install firmware when the management workstation does not have an FTP server,
do the following:
1.
Connect to the switch through the Ethernet port or the serial port.
2.
Move to the folder or directory on the workstation that contains the new
firmware image file.
3.
Establish communications with the switch using the File Transfer Protocol
(FTP). Enter one of the following on the command line:
>ftp
xxx.xxx.xxx.xxx
or
>ftp
switchname
where
xxx.xxx.xxx.xxx
is the switch IP address, and
switchname
is the
switch name associated with the IP address.
4.
Enter the following account name and password:
user:images
password: images
5.
Activate binary mode and copy the firmware image file on the switch:
ftp>bin
ftp>put
filename
6.
Wait for the transfer to complete, then close the FTP session.
xxxxx bytes sent in xx secs.
ftp>quit
7.
Establish communications with the switch using the CLI. Enter one of the
following on the command line:
telnet
xxx.xxx.xxx.xxx
or
telnet
switchname
where
xxx.xxx.xxx.xxx
is the switch IP address, and
switchname
is the
switch name associated with the IP address.
8.
A Telnet window opens prompting you for a login. Enter an account name
and password. The default account name and password are (admin,
password).
Summary of Contents for SANbox 5200 Series
Page 48: ...2 Using SANsurfer Switch Manager Using the Faceplate Display 2 30 59056 03 C A Notes...
Page 152: ...4 Managing Switches Displaying Hardware Status 4 46 59056 03 C A Notes...
Page 180: ...5 Managing Ports Graphing Port Performance 5 28 59056 03 C A...
Page 318: ...A Command Line Interface Zoning Command A 138 59056 03 C A Notes...