![background image](http://html2.mh-extra.com/html/qlogic/sanbox-5200-series/sanbox-5200-series_user-manual_3279626266.webp)
A – Command Line Interface
Set Setup Command
A-86
59056-03 C
A
LocalLogEnabled
Enables (True) or disables (False) the saving of log
information on the switch. The default is True.
RemoteLogEnabled
Enables (True) or disables (False) the recording of the
switch event log on a remote host that supports the
syslog protocol. The default is False.
RemoteLogHostAddress
The IP address of the host that will receive the switch
event log information if remote logging is enabled. The
default is 10.0.0.254.
NTPClientEnabled
Enables (True) or disables (False) the Network Time
Protocol (NTP) client on the switch. This client enables
the switch to synchronize its time with an NTP server.
This feature supports NTP version 4 and is compatible
with version 3. An Ethernet connection to the server is
required and you must first set an initial time and date
on the switch. The synchronized time becomes
effective immediately. The default is False.
NTPServerAddress
The IP address of the NTP server from which the NTP
client acquires the time and date. The default is
10.0.0.254.
EmbeddedGUIEnabled
Enables (True) or disables (False) the SANsurfer
Switch Manager Web applet. Changing this parameter
to False while the applet is running will terminate the
applet. The default is True.
Table A-26. System Configuration Settings (Continued)
Entry
Description
Summary of Contents for SANbox 5200 Series
Page 48: ...2 Using SANsurfer Switch Manager Using the Faceplate Display 2 30 59056 03 C A Notes...
Page 152: ...4 Managing Switches Displaying Hardware Status 4 46 59056 03 C A Notes...
Page 180: ...5 Managing Ports Graphing Port Performance 5 28 59056 03 C A...
Page 318: ...A Command Line Interface Zoning Command A 138 59056 03 C A Notes...