![background image](http://html2.mh-extra.com/html/qlogic/sanbox-5200-series/sanbox-5200-series_user-manual_3279626276.webp)
A – Command Line Interface
Show Command
A-96
59056-03 C
A
Whoami
Zoneset (Active, List)
Zoning (History, Limits, List)
switch
Displays switch operational information.
Table A-28
describes the switch
operational parameters.
Table A-28. Switch Operational Parameters
Parameter
Description
SymbolicName
Descriptive name for the switch
SwitchWWN
Switch world wide name
SwitchType
Switch model
BootVersion
PROM boot version
CreditPool
Number of port buffer credits available
to recipient ports
DomainID
Switch domain ID
FirstPortAddress
FC address of switch port 0
FlashSize - MBytes
Size of the flash memory in megabytes
LogLevel
Event severity level used to record
events in the event log
MaxPorts
Number of ports available on the switch
NumberOfResets
Number of times the switch has been
reset over its service life
ReasonForLastReset
Action that caused the last reset
ActiveImageVersion - build date
Active firmware image version and build
date.
PendingImageVersion - build date
Firmware image version and build date
that is pending. This image will become
active at the next reset or power cycle.
ActiveConfiguration
Name of the switch configuration that is
in use.
AdminState
Switch administrative state
AdminModeActive
Admin session status
Summary of Contents for SANbox 5200 Series
Page 48: ...2 Using SANsurfer Switch Manager Using the Faceplate Display 2 30 59056 03 C A Notes...
Page 152: ...4 Managing Switches Displaying Hardware Status 4 46 59056 03 C A Notes...
Page 180: ...5 Managing Ports Graphing Port Performance 5 28 59056 03 C A...
Page 318: ...A Command Line Interface Zoning Command A 138 59056 03 C A Notes...