![background image](http://html2.mh-extra.com/html/qlogic/sanbox-5200-series/sanbox-5200-series_user-manual_3279626044.webp)
2 – Using SANsurfer Switch Manager
Using the Faceplate Display
2-26
59056-03 C
A
2.12.2.3
Opening the Faceplate and Topology Display Popup Menus
The topology display shows all switches that are able to communicate and all
connections between switches. The faceplate display shows the front of a single
switch and its ports. Menu options vary with each type of popup menu.
To open the fabric popup menu in the topology display, right-click the graphic
window background.
To open the switch popup menu in the topology display, right-click the switch
icon in the graphic window.
To open the link popup menu in the topology display, right-click the link.
To open the switch popup menu in the faceplate display, right-click the
faceplate in the graphic window.
2.12.3
Topology Data Windows
The topology display provides the following data windows corresponding to the
data window tabs:
Devices – displays information about devices (hosts and storage targets)
connected to the switch. Refer to
”Devices Data Window” on page 3-33
for
more information.
Active Zoneset – displays the active zone set for the fabric including zones
and their member ports. Refer to
”Active Zone Set Data Window” on
page 3-34
for more information about this data window. Refer to
”Zoning a
Fabric” on page 3-38
for information about zone sets and zones.
Switch – displays current network and switch configuration data for the
selected switches. Refer to
”Switch Data Window” on page 4-8
for more
information.
Link – displays information about the inter-switch links. Refer to
”Link Data
Window” on page 3-35
to for more information.
2.13
Using the Faceplate Display
The faceplate display shown in
Figure 2-11
displays the switch name and
operational state, and port status. Consider the following functional elements of
the faceplate display:
Port Views and Status
Working with Ports
Faceplate Data Windows
Summary of Contents for SANbox 5200 Series
Page 48: ...2 Using SANsurfer Switch Manager Using the Faceplate Display 2 30 59056 03 C A Notes...
Page 152: ...4 Managing Switches Displaying Hardware Status 4 46 59056 03 C A Notes...
Page 180: ...5 Managing Ports Graphing Port Performance 5 28 59056 03 C A...
Page 318: ...A Command Line Interface Zoning Command A 138 59056 03 C A Notes...