3–Managing Switches
Configuring SNMP
3-30
59264-02 B
SNMP Configuration
The SNMP configuration defines how authentication traps are managed.
describes the SNMP configuration parameters. The illegal characters for the
user-defined fields are the pound sign (#), semi-colon (;), and comma (,).
Table 3-7. SNMP Configuration Parameters
Parameter
Description
SNMP Enabled
Enables or disables SNMP communication with other switches in the
fabric. If disabled, the user cannot use an SNMP application at a
workstation to talk to the switch that has this setting disabled.
Contact
Specifies the name (up to 64 characters) of the person who is to be
contacted to respond to trap events. The default is
undefined
.
Read Commu-
nity
Read community password (up to 32 characters) that authorizes an
SNMP agent to read information from the switch. This is a write-only
field. The value on the switch and the SNMP management server
must be the same. The default is
public
.
SNMP Proxy
If enabled, you can use SNMP to monitor and configure any switch in
the fabric.
Location
Specifies the name (up to 64 characters) for the switch location. The
default is
undefined
.
Authentication
Trap
Enables or disables the reporting of SNMP authentication failures. If
enabled, a notification trap is sent when incorrect community string
values are used. The default value is
False
.
Write Commu-
nity
Write community password (up to 32 characters) that authorizes an
SNMP client to write information to the switch. This is a write-only
field. The value on the switch and the SNMP management server
must be the same. The default is
private
.
