background image

3–Managing Switches

Using Call Home

59264-02  B

3-49

Using the Call Home Profile Editor

Use the Call Home Profile Editor dialog box (

Figure 3-21

) when creating a new 

profile or editing/copying an existing profile. The Call Home Profile Editor dialog 
box is displayed after clicking 

Add

Edit

, or 

Copy

 on the Call Home Profile 

Manager dialog box. Or, on the 

Edit

 menu, click 

Add New Profile

Edit Profile

,

 

or 

Copy Profile

. The name on the title bar changes to reflect adding a new profile, 

making a copy of an existing profile, or editing an existing profile. Enter a name for 
the profile, select an event level threshold, a format type for the message text 
being sent (short/full/tsc1), enter the size of the message being sent, enter the 
subject of the Email, and enter the Email address(es) of the recipients. Click 

Add

 

to add the Email address(es) to the list. Click 

OK

 to save the changes. 

You can use the Call Home Profile Editor dialog box to make a copy of and 
rename an existing profile. On the Call Home Profile Manager dialog box, select a 
profile on the list of existing profiles (

Figure 3-20

). To view the Call Home Profile 

Editor dialog box (

Figure 3-21

), on the tool bar, click 

Copy

; or on the 

Edit

 menu, 

click 

Copy Profile

. The dialog box is pre-populated with all of the information from 

the selected profile, except the name. Enter a unique name for the profile copy 
and click 

OK

 to save the new profile. 

Figure 3-21. Call Home Profile Editor Dialog Box

                                                                                           

Summary of Contents for SANbox 5800V Series































































































































































Reviews: