3–Managing Switches
Using Call Home
3-52
59264-02 B
Applying All Profiles on a Switch to Other Switches
You can apply all profiles on a switch to one or more switches in a fabric. The Call
Home Profile Multiple Switch Apply dialog box (
) is displayed after
selecting the
Apply Changes to Multiple Switches in Fabric
option on the Call
Home Profile Manager dialog box (
). The Available Switches list
shows all switches in the fabric. Switch names that are grayed-out do not have
current Call Home firmware, and cannot receive any profiles. The Selected
Switches list shows the switch names that you selected to receive all profiles from
the switch. On the Available Switches list, select the switches in the fabric to
receive all profiles, and click double-arrow to move them to the Selected Switches
list. Click
OK
to start the process. The Results area indicates success or failure of
applying all the profiles on a switch to the switches you selected.
Figure 3-23. Call Home Profile Multiple Switch Apply Dialog Box
Address
The Email address of the recipient being added to the
Tech Support Center profile. A maximum of 10 addresses
is allowed and displayed on the addresses window.
Table 3-12. Call Home Editor
—
Tech Support Center Profile Entries
Entry
Description