2–Managing Fabrics
Transparent Router
59264-02 B
2-7
Figure 2-1. TR Mapping Manager Dialog Box
After you click
OK
in the TR Mapping Manager dialog box, the IFZs are created
and saved to the switch. If there is an active zone set with TR mappings, the old
IFZs are deleted and replaced with the new IFZs, and then the active zone set is
re-activated. If there is no active zone set, a zone set named TR_MAPPING_SET”
(default name) is created, the new IFZs are added to the zone set, and then the
zone set is activated. If there are no TR mappings, the old IFZs are deleted from
the active zone set, and then the active zone set is re-activated. If there are no
zones and no IFZs in the active set, the active zone set is deactivated.
Removing an Inter-Fabric Route
To remove an inter-fabric route:
1.
On the faceplate display on the
Fabric
menu, click
TR Mapping Manager
.
2.
In the TR Mapping Manager dialog box (
), select a TR mapping
member from the TR Mapping list, and then click
Remove
, or on the Edit
menu, click
Remove
.
A warning dialog box prompts you to confirm the removal of the selected
mapping members.
3.
Click
OK
to confirm the removal of the selected TR mapping member.
