background image

2–Managing Fabrics

Zoning

2-28

59264-02  B

Aliases

To make it easier to add a group of ports or devices to one or more zones, you can 
create an alias. An alias is a named set of ports or devices that are grouped 
together for convenience. Unlike zones, aliases impose no communication 
restrictions between its members. You can add an alias to one or more zones. 
However, you cannot add a zone to an alias, nor can an alias be a member of 
another alias.

Zone Sets

A zone set is a named group of zones. A zone can be a member of more than one 
zone set. Each switch in the fabric maintains its own zoning database containing 
one or more zone sets. This zoning database resides in non volatile or permanent 
memory and is therefore retained after a reset. Refer to 

“Configured Zonesets 

Data Window” on page 2-26

 for information about displaying the zoning database.

To apply zoning to a fabric, choose a zone set and activate it. When you activate a 
zone set, the switch distributes that zone set and its zones, excluding aliases, to 
every switch in the fabric. This zone set is known as the active zone set. Refer to 

“Active Zone Set Data Window” on page 2-25

 for information about displaying the 

active zone set.

                                                                                           

NOTE:

Zones that are currently not in a zone set are considered to be part of the 
“orphan zone set”. The orphan zone set is not an actual zone set, but rather 
a way of displaying the zones that are not currently in a zone set. 

Summary of Contents for SANbox 5800V Series































































































































































Reviews: