3–Managing Switches
Using the Switch Data Window
59264-02 B
3-7
CIM Enabled
Common Interface Model status. The CIM agent is
based on the SNIA Storage Management Initiative
Specification (SMI-S), which is the standard for SAN
management in a heterogeneous environment.
FTP Enabled
FTP status
Management Server Enabled
Management server status.
SNMP Enabled
SNMP enabled or disabled.
Call Home Enabled
Call Home status. If enabled and configured, switches
can send alerts and events to pagers, and send Email.
Users can configure the type of events and where the
alerts are sent.
Zones/Security Group
Merge Auto Save
If enabled, any zoning updates from the fabric will be
saved in permanent (non volatile) memory as well as
temporary memory. If disabled, any zoning updates
from the fabric will be saved only in temporary memory
and will be lost after a switch reset.
Zoning Default Visibility
N/A—does not apply to this switch
Default Zone
Disables communication between ports and devices
not defined in the active zone set, or when there is no
active zone set.
Discard Inactive
Automatically removes the previously active zone set
when a zone set is activated on a switch.
Implicit Hard Zoning
Introduces hardware enforcement of zoning regardless
of type. All zones and all supported zone member
types will have hardware enforcement.
Security Auto Save
N/A—does not apply to this switch
Security Fabric Binding Enable
N/A—does not apply to this switch
Advanced Group
R_A_TOV
Resource allocation timeout value
E_D_TOV
Error detect timeout value
Number of Donor Groups
Total number of donor port groups. A donor group is a
set of ports on a switch that can donate buffer credits to
each other.
Table 3-1. Switch Data Window Entries (Continued)
Entry
Description
