2–Managing Fabrics
Zoning
59264-02 B
2-39
To remove a zone set, do the following:
1.
On the
Zoning
menu, click
Edit Zoning
to view the Edit Zoning dialog box.
2.
On the Zone Sets tree, select the zone set to be removed.
3.
On the
Edit
menu, click
Remove
to remove the zone set.
4.
Click
Apply
to save changes to the zoning database.
Alternatively, you may use shortcut menus to remove a zone set from the
database.
Managing Zones
Managing zones involves the following:
Removing a Zone from a Zone Set
Removing a Zone from All Zone Sets
Creating a Zone in a Zone Set
To create a zone in a zone set, do the following:
1.
On the
Zoning
menu, click
Edit Zoning
to view the Edit Zoning dialog box.
2.
Select a zone set.
3.
On the
Edit
menu, click
Create a Zone
.
4.
On the Create a Zone dialog box, enter a name for the new zone, and click
OK
. The new zone name is displayed on the Zone Sets dialog box. A zone
name must begin with a letter and be no longer than 64 characters. Valid
characters are 0-9, A-Z, a-z, _, ^, $, and -.
NOTE:
Changes that you make to the zoning database are limited to the managed
switch and do not propagate to the rest of the fabric. To distribute changes to
configured zone sets fabric wide, you must edit the zoning databases on the
individual switches.