6 – Getting Started
Setting SANsurfer FC HBA Manager Security
FS0054603-00 C
6-9
Q
■
LUN configuration
■
Password (when you want it changed)
You can change the SANsurfer FC HBA Manager access password for any host
connected to your system for which you have administrator or root privileges.
NOTE:
The default SANsurfer FC HBA Manager access password is
config
.
Change this password after installation to ensure that security is not
compromised.
Perform the following steps to set the application access password for a host:
1. In the SANsurfer FC HBA Manager main window HBA tree, select the host for
which you want to set the application access password.
2. Click the
Security
tab. The
Security
tabbed page displays
(see figure 6-5)
.
The host name displays at the top of the tabbed page.
Figure 6-5. Security Tabbed Page
3. In the Host Access section, do the following to verify that you have administrator
or root privileges for the selected host. These are the system login and password
you use to access the machine.
a. In the
Login
box, type the login name that has administrator or root privileges
on the host you selected.
b. In the
Password
box, type the login password for the login name.
Summary of Contents for SANsurfer FC HBA Manager Application
