2 – Switch Command Line Interface
Groups and Commands
2-46
D000025-002 Rev. A
S
Sample Output:
NOTES:
This command allows the user to set the next boot image for the device.
A '*' next to the image entry indicates the currently selected bootimage. A '#'
indicates the currently active bootimage.
-> bootSelect 3 -noprompt
Currently installed firmware versions
index : alias : version
--------------------------
1 : image1 : 4.0.0.0.28;
*# 2 : image2 : 4.0.0.0.32;
* - indicates Default image (will run at next reboot)
# - indicates Active image
Default boot image index = 2
