2 – Switch Command Line Interface
Groups and Commands
D000025-002 Rev. A
2-55
A
smMasterLMC
Set/display the Master SM's LMC value to be used on CA ports.
Syntax:
Options:
Sample Output:
NOTES:
The value of the LMC determines how many LID's are assigned to an
endport; 2 LMC LIDs are assigned to endports based on this value. For example,
setting the LMC to a value of 3 will assign 2^3 or 8 LID's per endport.
smShowMasterLid
Display the LID of the subnet manager.
Syntax:
Options:
Sample Output:
NOTE:
Use this command to display the SM's LID. It may be the local LID if the SM
is the master.
smMasterLMC [lmc]
lmc
The LMC value between 0 and 7, inclusive.
-> smMasterLMC 2
Master SM LMC: 2 (4 LID(s) per port)
smShowMasterLid
None.
-> smShowMasterLid
The SM LID is 0x0001
