Qlogic SilverStorm 9020, Quick Start Manual

5

Step 4. From the main menu select OOB LAN IP then Set OOB LAN IP. The
following screen is displayed:

Figure 1. Set OOB LAN IP Window

Step 5. Type in the new switch IP address.

Step 6. Type in the new net mask.

Step 7. Click Apply.

Step 8. To change the switch default gateway, from the main menu select
OOB LAN IP then Set Default Gateway IP. The following screen is displayed:

Figure 2. Set Default Gateway IP Window

Step 9. Type in the correct switch default gateway IP address.

Step 10. Click Apply.

NOTE:

A reboot is required to activate the new gateway IP address.

Activating/Deactivating the Embedded Fabric Manager

If the embedded  (FM) has been purchased, it requires a license key to activate it via Chassis Viewer. The license key information 
is contained in an envelope marked "Fabric Manager License". This envelope is packed in the box with the switch. For detailed 
information on activating the Fabric Manager, refer to the “License Keys; Key Administration” and “QuickSilver Fabric Manager 
Control” sections of the 

SilverStorm 9000 Users Guide

.