Contemporary Research
5
QMOD-HDMI1.5
Program A and Program B
This series of menus lets you drill down to all the possible options for either Program.
Audio 1 Input
Sets audio for the currently selected source. If you plan on switching sources in your
application, select each video input, then select the associated audio. The audio will then
automatically follow the selected video input.
None | HDMI 1 | HDMI 2 | SPDIF 1 | SPDIF 2 | Analog 1| Analog 2
Audio 1 Format
Selects audio format for stereo PCM or analog audio. Incoming Dolby Digital AC3 audio
encoding will be passed through.
AC3 | MP12
Audio 1 Lang
Displays metatext for SAP audio channel language.
English | Spanish | Portuguese |French| German
Audio 2 Input
Sets the source for the second SAP audio track for the selected video input. Audio will be
in MPEG 1 Layer 2 format
None | HDMI 1 | HDMI 2 | SPDIF 1 | SPDIF 2 | Analog 1| Analog 2
Audio 2 Lang
Displays metatext for SAP audio channel language.
English | Spanish | Portuguese |French |German
Video Input
Select the video input
None | HDMI 1 | HDMI 2 | SPDIF 1 | SPDIF 2 | Analog 1| Analog 2
Auto Out Res
When set to
On
, the QMOD will automatically output the program as the same resolution
as the source.
On | Off
Resolution
When the scaling option is active, you can specify the output resolution. When it’s not, the
output will be set by the input.
1080i | 720p | 480p | 480i
Bitrate (Mbps)
Bitrate is adjustable in half steps from 10-25. Default rate will be 18 Mbps, set to 18 or
below for dual-channel operation.
IP Bit Rate
Only visible when QMOD outputs on Ethernet only. Selects Constant or Variable rate
Chan Major ID
Major virtual channel ID for program. Default is 000, will automatically insert the physical
channel number as the Major ID.
Chan Minor ID
Minor virtual channel ID. Default is 1, if set to 000, channel ID will only use the Major
channel ID
Chan Name
Enters channel short name, up to 7 characters. QMOD A or QMOD B is default text.
Press right or left arrow to start editing, use Up and Down arrows to select character.
No Vid Color
Sets background color displayed when no video is present
Orange | Purple (default) | Green
Major ID
Major virtual channel ID for program. Default is 000, will automatically insert the physical
channel number as the Major ID.
Minor ID
Minor virtual channel ID. Default is 1, if set to 000, channel ID will only use the Major
channel ID
Name
Enters channel short name, up to 7 characters. “QMOD” is default text.
Press right or left arrow to start editing, use Up and Down arrows to select character.
Sync Trig Level
May help how fine details are displayed
1-4
CC Source
Selects source for captioning. Video 1 and 2 provide Line 21 captioning data
None | Video 1 | Video 2
Horiz Freq
Shows horizontal frequency of source
Vertical Freq
Shows vertical frequency of source
Lines
Shows number of lines in source video
