Loading the
Media Cassette
QMS 2060 Print System
Operation
2-4
n
Place media correctly in the tray or cassette. Many manufacturers
place an arrow on the end of the wrapper indicating the side of
the media to use for printing. If you cannot determine which side
of the media to print on, remove the media from the cassette,
rotate the stack a half-turn, turn the stack over, and then place it
back in the cassette.
n
If none of the above relieves media jamming, notify your vendor.
Loading the Media Cassette
The QMS 2060 Print System comes standard with either a 500-sheet
letter/A4 cassette or a 250-sheet cassette, depending on the model
ordered. See the “Consumable Supplies,” section of appendix B in
the
Reference manual for cassette media capacity information. These
cassettes are interchangeable and therefore can be either in the
upper or lower position. The printer automatically pulls media from the
cassette.
Basically, loading media in either cassette involves the following
steps:
n
Prepare the paper
n
Load the cassette
Each of these steps is described in detail later in this procedure.
There is a section for loading a 500-sheet cassette and one for load-
ing a 250-sheet cassette.
Summary of Contents for 2060
Page 1: ...1800448 001B QMS 2060 Print System Operation...
Page 66: ......
Page 152: ......
Page 158: ......
