6.
Connect all cables and external attachments.
7.
Connect the power cord to the electrical outlet.
8.
Power on the QBoat.
Installing M.2 Expansion Cards
Warning
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
Important
The M.2 expansion slot on the QBoat supports M.2 expansion cards with A keys or A+E
keys. Ensure that the M.2 expansion card that you install is of the correct type.
1.
Power off the QBoat.
2.
Disconnect the power cord from the electrical outlet.
3.
Disconnect all cables and external attachments.
4.
Install the M.2 expansion card.
a.
Attach the riser screw.
QBoat Sunny User Guide
Installation and Configuration
16