5.
Connect all cables and external attachments.
6.
Connect the power cord to the electrical outlet.
7.
Power on the QBoat.
Installing the Wall Mounting Kit
The wall mounting kit enables you to attach the QBoat to a wall.
Warning
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1.
Power off the QBoat.
2.
Disconnect the power cord from the electrical outlet.
3.
Disconnect all cables and external attachments.
4.
Align the two larger screw holes of a wall mounting bracket with the holes on a side of the heatsink
base.
5.
Attach the screws to secure the wall mounting bracket to the heatsink base.
QBoat Sunny User Guide
Installation and Configuration
18