LED Behavior
1
2
B
D
C
A
MGMT
Console
Rst
Status
Locator
1
3
2
4
9
11
10
12
13
15
14
16
SFP+
SFP+
10GbE
10GbE
B
D
C
A
B
D
C
A
1
3
2
MGMT
Console
Rst
Status
Locator
4
5
7
6
8
9
11
10
12
13
15
14
16
SFP+
SFP+
10GbE
10GbE
4
3
5
1
2
4
3
5
1
2
B
D
C
A
MGMT
Console
Rst
Status
Locator
1
3
2
4
9
11
10
12
13
15
14
16
SFP+
SFP+
10GbE
10GbE
B
D
C
A
B
D
C
A
1
3
2
MGMT
Console
Rst
Status
Locator
4
5
7
6
8
9
11
10
12
13
15
14
16
SFP+
SFP+
10GbE
10GbE
4
3
5
1
2
4
3
5
LED
Status
Description
System Status
Green
The device is ready.
Flashes Green
• The device is being initialized.
• The firmware is being updated.
Note :
When updating the firmware, do not remove the power
cord or USB cable, and do not force-exit the application.
• The device is being reset.
Red
A fatal device error occurred.
Off
The device is powered off.
Locator
Flashing Amber
Indicates the physical location of the switch. The default timer
is 30 minutes when you are configuring the switch. The locator
LED flashes for 30 minutes when configuring the switch.
Off
• The switch is cloud management mode.
• The switch failed to connect to the cloud.
Management port
(Left-speed)
Green
The link speed is operating at 1 Gbps.
Amber
The link speed is operating at 100 Mbps.
Flashes Green
or Amber
Data is being transmitted.
Off
There is no network connection.
Management port
(Right-link and
activity)
Amber
The port is operating as an uplink port.
Flashes Amber
Data is being transmitted.
Off
There is no network connection.
10GbE RJ45
Green
The link speed is operating at 10 Gbps.
Flashes Green
Data is being transmitted.
Amber
The link speed is operating at 5 Gbps, 2.5 Gbps, 1Gbps, or
100Mbps.
Flashes Amber
Data is being transmitted.
Off
There is no network connection.
10GbE SFP+
(Left)
Green
The link speed is operating at 10 Gbps.
Flashes Green
Data is being transmitted.
Off
There is no network connection.
10GbE SFP+
(Right)
Amber
The link speed is operating at 1 Gbps.
Flashes Amber
Data is being transmitted.
Off
There is no network connection.
QSW-M3212R-8S4T
QSW-M3216R-8S8T
