-
68
-
Recover data from eSATA disk when the SATA disk of TS-109 fails:
When the SATA disk of TS-109 fails, you can recover data from a backup disk if
the disks have been previously configured as Q-RAID 1. Please follow the steps
below to recover data from a backup eSATA disk to TS-109.
1.
Replace the failed SATA disk with a new one.
2.
Format the new disk by clicking
Format now
in Device Configuration-SATA
Disk page.
3.
Connect an eSATA disk to TS-109.
4.
Go to Device Configuration- eSATA Disk page. Click the
Recover Data
button* under Disk Usage Setting. All data on the eSATA disk will be
recovered to the new SATA disk.
Warning:
After executing this function, all data different from the
eSATA disk will be removed from the SATA disk of TS-109.
*This button will appear when the following conditions are all met:
a.
The usage of the plugged in USB disk has been configured as Q-RAID 1.
b.
The SATA disk in TS-109 has been changed or the plugged in USB disk has been
configured as Q-RAID 1 in other servers.
c.
No Q-RAID1 disk is currently running on TS-109.
Summary of Contents for TS-109
