249
The NAS supports instant data copy backup from USB devices to the NAS or vice versa
using the one touch copy button. To use this function, follow these steps:
1. Make sure a hard drive is installed and formatted on the NAS.
2. Configure the behavior of the Copy button in "Backup Station" > "USB One Touch
Copy".
3. Connect the USB device to the front USB port of the NAS.
4. Press the Copy button once. The data will be copied according to your settings.
Note :
Incremental backup is used for this feature. After the first data backup, the
NAS only copies the files changed since the last backup.
C a ution:
Files are copied from the source to the destination.
E x tra file s in the
de s tina tion will be de le te d. F ile s with the s a m e na m e s will be ov e rwritte n by
the s ourc e .
Source data will remain unchanged.
As a n e x te rna l s tora ge driv e
When an external device is connected to the front USB port, it will be identified as an
external storage drive connected to the port.
